Morimoto Retrorubber Butyl Glue - Street Ambitionz Morimoto Retrorubber Butyl Glue - Street Ambitionz
Morimoto Retrorubber Butyl Glue $20.00
PROTECTION: Is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. After many years sealing headlights with spools of butyl meant for windshields and sunroofs; we've finally got a product that puts OEM-style sealant designed specifically for use in headlights, and indeed it works well! PURPOSE: Until now, the only other butyl-ropes on the market were meant for "universal" applications, and true headlight butyl only came in blocks that were nearly impossible to apply without industrial machinery. Morimoto's Retro-Rubber is designed specifically for resealing headlights, not windshields, sunroofs, etc. CONSISTENCY: At room temperature, the RetroRubber has a much harder consistency compared to OCI Butyl glue. Given the "fingernail test" it will harden up just like any OEM Butyl Rubber glue once cooled. COLOR: Not all headlights are created equally! Whether your housing was originally sealed with black or gray glue, the RetroRubber has you covered with options. Available in....you guessed it, black or gray... you won't have to settle for a mis-match. QUANTITY: Each roll comes with approximately 4M of glue, which is easily enough to re-seal two or more large headlights. Simply stretch it out until it's the perfect thickness to fit inside the headlight channel, cut it to length, rough-fit the lens back onto the housing, heat for at 265F for seven minutes, and compress the housing back together. Done! SHIPPING DISCLAIMER: THIS PRODUCT CANNOT BE EXPORTED FROM THE USA! IF YOU ARE FROM A FOREIGN COUNTRY, DO NOT BUY THIS PRODUCT AS IT WILL LIKELY CAUSE YOUR ENTIRE ORDER TO BE RETURNED AND/OR SEIZED BY LOCAL CUSTOMS. WE ARE NOT RESPONSIBLE FOR LOST SHIPMENTS HEADING TO FOREIGN DESTINATIONS CONTAINING THIS PRODUCT. BUY & SHIP AT YOUR OWN RISK! PRODUCT SPECS WHAT'S INCLUDED SEALANT: 1x Roll Morimoto RetroRubber Butyl Glue SATISFACTION: From a moisture-free headlight WARRANTY: N/A COMPATIBILITY USES: Re-sealing headlights / tail lights NOTICE: Not a substitute for epoxy, screws, or clips! TECH SPECS MATERIAL: Grey or Black Automotive Grade Butyl Rubber ORIGIN: Yokohama, Japan DIMENSIONS: Approx. 4m L, 7.5mm DIA (stretch to thin)
BI-XENON: Morimoto Mini D2S 5.0 - Street Ambitionz BI-XENON: Morimoto Mini D2S 5.0 - Street Ambitionz
BI-XENON: Morimoto Mini D2S 5.0 from $145.00
PRODUCT DETAILS HIGH Five! Morimoto has officially achieved Projector-Perfection with the 5th gen Mini D2S Bi-xenons! If you’re looking for the ultimate beam pattern boner; it’s really not going to get any better than this folks. Perfectly balanced low beam. Hyper spot high beam. The crispiest ECE style cutoff. Unquestionable OEM-quality…all packed into a projector that’s undeniably easy to install. If we died and went to headlight heaven, the 5.0 would be greeting us at the gate. PROJECTOR-PERFECTION: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width….But no other option creates the perfect balance of width & hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark; Morimoto baked in best practices from a variety of well-respected OEM and aftermarket projectors. With over a decade of experience, we trust that their latest and greatest equates to the perfect all-around perfomer. DISTANCE: The hot spot on the new 5.0 bi-xenon is roughly 70% brighter than the already-impressive 4.0 design. While the high beam unloads a lot more volume of light; virtually no additional intensity has been reserved. What that means: You get the maximum benefit from your bulbs & ballasts in low beam mode…where drivers spend 99% of their time. The controlled decrease in intensity from the hyper-hotspot down through the foreground results in a distribution of light that makes driving at night very comfortable & safe. Why? Because too much intensity on the ground too close to the front of your vehicle will make your eyes adjust, compromising your ability to see very far. Science! WIDTH: Power is nothing without control, and even the best D2S bulbs and 50w ballasts won’t always result in a satisfying output when projected out on the road improperly…so the KEY is really how that light is deployed. Thanks to the beauty in the center of this beast [all new optics package + flat cast cutoff shield] You really end up with a beam pattern that’s extremely wide and flat, with zero bowing. But that’s not all: The position of the shield has been fine-tuned so that there is a band of intense light that spans side-to-side directly under the cutoff line. RX350 Bi-xenons, S2000’s, LS430s, SC430’s….all of the best from Koito now need to bite their tongue, because that’s all they had on Morimoto prior to the 5.0 party! ANTI-REFLECTIVE COATING LENS: The blue tint to the lens is more than marketing fluff too. That’s an AR coating, and it serves a real purpose. AR coatings increase the transmission of light through the glass all while decreasing bleed. The result? 10% more light and less glare compared to a traditional clear lens. The blue-hue may not be for everybody, but in this case we’re down. Read more about AR coatings HERE. HARDWARE UPGRADES: Forget the finicky 2 piece bulb holders found on the 4.0s, these come standard with the MotoHolders – an all-new one-piece design that’s far easier to work with. The new CNC machined aluminum lock rings are not only pretty looking, but they’re 300% stronger than the old die cast part. To tighten them, Morimoto now offers an optional lock-ring tightening tool that works with any 10mm socket set. Torx screws now hold the lens holder on too instead of Philips screws. While the 5.0 get’s a big boost in the performance department, it’s also clear they’ve paid attention to the details in the parts department too. We like it! INSTALLATION SUMMARY: On a H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it!  PRODUCT SPECS WHAT'S INCLUDED PROJECTORS:2x Morimoto Mini D2S 4.0 Bi-xenon HARDWARE:2x EZ Lock Rings, Bulb Caps, Etc SOLENOID INPUTS:2x 9006 Male Pigtails WARRANTY:3 Years COMPATIBILITY APPLICATIONS:Universal (cars/trucks/motorcycles) DIRECT FITMENT:H4 Headlights (little/no mods required) MODS REQUIRED:H1,H7,H11,H13,9005,9006,9007 housings OUTPUTS:Low and High Beam UNITED STATES:LHD (Left Hand Drive) AU, UK, JAPAN:RHD (Right Hand Drive) BULBS:D2S/D2H HID Only HID SYSTEMS:35w and 55w SHROUDS:All Styles Except Mini Gatling/Graphite CENTRIC RINGS:Not Required CERTIFICATIONS:Exceeds DOT requirements TECH SPECS HEIGHT:85mm WIDTH:101mm DEPTH:142mm LENS DIAMETER:3.0" MOUNTING SHAFT:Diameter = 35mm LOCK NUT:CNC Aluminum HOUSING DEPTH:117mm Minimum STANDARD LENS:AR Coated Kuria Optic
High Beam: Profile Hi-Lens LED - Street Ambitionz High Beam: Profile Hi-Lens LED - Street Ambitionz
High Beam: Profile Hi-Lens LED from $130.00
PRODUCT DETAILS PROFILE PERFORMANCE: The automotive aftermarket’s best name in LED Lighting; and there's nothing better than some badass high beam LED headlights. While there's nothing wrong with your halogen high beam bulbs, or a set of bi-xenon/Bi-LED projectors, overkill is under-rated, and that's why we're giving two thumbs up to the new Profile high bream projector. WELL DONE: The Profile Hi-Lens projector is plenty bright..it's basically a miniature LED light bar / spot light that's designed to fit in your high beam reflector with ease. With their advanced optics, XHP35 LEDs, and multi-lens projector, they look as good as they work too! EASY INSTALL: The Hi-Lens features a threaded-shaft style mount on the back that allows the projectors to be locked on with their included hardware, and minimal modifications to your headlight. Best part is that the threaded shaft is about twice as long as what you would normally find on something like a Mini H1 projector, making it even easier to install across the board. That's winning! DEMON EYES DRL: With an integrated white LED Daytime Running Light mode, you can run these in low-intensity mode just as most factory halogen high beams do during the daytime. Wiring is simple too, with a 9005/9006 male socket for main power, and a +/- lead for the DRL - all exiting from the threaded shaft. Super clean, super simple. SHROUDS: Conveniently, the Profile Hi-Lens LED projector is compatible with most every existing shroud on the market except for the "Mini" series. If they've got a flange inside to accept a centric ring, you should be able to snap them right onto the bezel on the front face of the Hi-Lens. Love it! PRODUCT SPECS WHAT'S INCLUDED PROJECTORS:2x Profile Bi-Lens Bi-LED LED DRIVERS:2x External Regulators WARRANTY:2 Years COMPATIBILITY APPLICATIONS:Universal (Cars, trucks etc) DIRECT FITMENT:H7 housings (little/no mods) MODS REQUIRED:H1, H11, H13, 9005, 9006, 9007 housings OUTPUTS:High Beam SHROUDS:All Styles Except “Mini” or “Square” CENTRIC RINGS:Not Required TECH SPECS HEIGHT:78mm WIDTH:78mm PROJECTOR DEPTH:92mm MAX DEPTH:92mm (includes shaft / wire exit) LENS DIAMETER:78mm/3" POWER:25w (High Beam) / 2.5w (DRL) DRL CURRENT:200mA HIGH BEAM CURRENT:1470mA LUMINOSITY:2900lm (combined) LED TYPE:SSC MOUNTING SHAFT:Diameter = 19mm LOCK NUT:Size = 30mm HOUSING DEPTH:66mm Minimum STANDARD LENS:100% clarity performance-optic
BI-XENON: Profile Bi-Lens D2S - Street Ambitionz BI-XENON: Profile Bi-Lens D2S - Street Ambitionz
BI-XENON: Profile Bi-Lens D2S $80.00
PRODUCT DETAILS PROFILE PERFORMANCE: The automotive aftermarket’s best name in LED Lighting; and when it came time to build a bi-xenon, there's no better name in the biz than Morimoto to make it happen. So working hand in hand with the industry experts, Profile is working hard to deliver the performance that we all expect. The Profile Bi-Lens D2S is based on Morimoto's D2S 3.0 platform that retrofitters often miss for all the right reasons and we have good news, it's back as a Profile exclusive product! OPTICS: The wider re-designed reflector bowl concentrates the hotspot directly under the step for intense performance but also plenty of width. The cutoff line is crisp, clean, and full of brilliant color flicker. Smaller bi-xenon projectors will struggle to compete with the Profile Bi-Lens D2S, as they will easily out shine smaller projectors like the Mini H1. Capable of producing both low and high beam patterns, these aftermarket bi-xenon projectors are the only units you'd need to retain full functionality of your headlights. EASY INSTALL: Like the popular Mini H1's, the Profile Bi-Lens D2S shares the same threaded shaft design at the rear of the reflector bowl to ease installation, improve versatility, and rids the need to cut and glue the headlight reflector to mount the new projector in place – which nobody can argue against. The Profile Bi-Lens D2S just bolts onto your reflector bowls and away you go to blast the streets with a ton of bright but controlled light. LENS OPTIONS: The optional square lens, with its modern shape, is for those looking for something unique without compromising light output. Though the shroud options are more limited for the square lens, there are enough to keep your options open and build a badass retrofit for your truck (or car) with square-shaped reflectors. These aftermarket bi-xenon projectors are also available with a more traditional 3” round lens, that will accept all shrouds. Both versions are 100% optically clear so there's no need for a further upgrade. There is no need for centric rings to mount shrouds either. COMPACT: No other “full size” bi-xenon projector comes close to the compact geometry of the Profile Bi-Lens D2S. Stripped down to no more material than what's essential, they are supremely small in terms of height, are very shallow, and no wider than need be. Their traditional 3” lens gives them a certain presence when mounted inside of the headlights – but if you're tight on space or simply want to avoid trimming / extra mods at all costs – then the Profile Bi-Lens D2S is the way to go. PRODUCT SPECS WHAT'S INCLUDED PROJECTORS:2x Profile Bi-Lens D2S HARDWARE:2x Lock Rings / Bulb Holders WIRING:Bi-xenon solenoid pigtails WARRANTY:2 Years COMPATIBILITY APPLICATIONS:Universal (Cars, trucks etc) DIRECT FITMENT:H4 housings (little/no mods) MODS REQUIRED:H1, H7, H11, H13, 9005, 9006, 9007 housings OUTPUTS:Low and High Beam TRAFFIC PATTERNS:LHD Standard SHROUDS:All Styles Except “Mini” CENTRIC RINGS:Not Required BULB SIZE:D2S / D2H HID Only TECH SPECS HEIGHT:95mm WIDTH:100mm DEPTH:145mm (w/ shaft) LENS DIAMETER:3.0" round SHAFT DIAMETER:35mm HOUSING DEPTH:117mm Minimum SOLENOID:Side Push SOLENOID INPUT:9006 Male BULB SIZE:D2S/D2H
Morimoto Motoholders - Street Ambitionz
Morimoto Motoholders from $20.00
WEAKEST LINK: A great sports car is nothing without a set of sticky tires..Just like a great projector is nothing without precise bulb alignment. Though the Morimoto Mini H1 projector has undoubtedly gotten better and better with every generation...even the latest 7.0 version still comes standard with the same old damn bulb holder. Sure, they work, but that doesn't mean they work well, at least well-enough for all of us Headlight Junkies! STORY TIME: It wasn't until TRSMatt retrofitted a set of Morimoto Mini H1 7.0's in his own car and realized that the struggle is indeed real. Alas, the man himself can't have a whack beam pattern...it was time to step up and finally do something about it. So he picked up the phone, called the engineer, revved up the CNC mill, and here we have it! Problem solved. BETTER, NOT BIGGER: Designed by Morimoto in California, the MotoHolder is way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived. PLASTIC MAKES IT POSSIBLE: Yeah, that's right - they're made of injection molded plastic! Using BASF Ultramid A3WG6 plastic which is reinforced with glass fiber for excellent dimensional stability, stiffness, and temperature resistance up to 280C (530F) - they should withstand the test of time no matter if you're a 35W or 50W user. PRICE IS RIGHT: If you've already got a set of headlights retrofitted with Mini H1 projectors, there is no better place to put your $20 than investing in the MotoHolders. Poor cutoff? Out of focus hotspot? Weak distribution? Drives you nuts every time you pull into the garage? Yeah, we know the feeling, and as long as your bulbs are good, these will resolve the rest! WHAT'S INCLUDED HOLDERS: 2x Morimoto MotoHo1ders SCREWS: NOT INCLUDED (Reuse existing) BULBS: NOT INCLUDED WARRANTY: 5 Years SATISFACTION: Finally! COMPATIBILITY MINI H1: Mini H1 1.0-7.0 (excluding 6.0) MATCHBOX: Matchbox 1.0-2.0 ACME PROJECTORS: Standard and Super H1 GENERIC PROJECTORS: "Mini H1" Style (all versions) BULBS: All H1 HID TECH SPECS MATERIAL: BASF Ultramid A3WG6 TEMP TOLERANCE: 280C / 530F COLOR: Black FLAMMABILITY: UL94 Rated
Morimoto Motohold2RS - Street Ambitionz
Morimoto Motohold2RS $15.00
PRODUCT DETAILS UP TO DATE: The Morimoto Mini D2S 4.0 is arguably the best bi-xenon projector on the market, but the standard bulb holders still blow as much as version 1 point 0. Sure, they work, but that doesn't mean they work well, at least well-enough for all of us Headlight Junkies! BETTER, NOT BIGGER: Designed by Morimoto in California, the new MotoHolD2rs are way more effective but virtually no bigger overall than the old die cast + spring setup. The clever one-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. We know the entire 5.0 bi-xenon projector will be badass, but this will be a big part of it! PLASTIC MAKES IT POSSIBLE: Yeah, that's right - they're made of injection molded plastic! Using BASF Ultramid A3WG6 plastic which is reinforced with glass fiber for excellent dimensional stability, stiffness, and temperature resistance up to 280C (530F) - they should withstand the test of time no matter if you're a 35W or 50W user. PRICE IS RIGHT: If you've already got a set of headlights retrofitted with Mini D2S projectors, there is no better place to put your $15 than investing in the MotoHolD2rs holders. Out of focus hotspot? Springs poking out the back of your headlights? Drives you nuts every time you pull into the garage? Yeah, we know the feeling, and as long as your bulbs are good, these will resolve the rest! PRODUCT SPECS WHAT'S INCLUDED HOLDERS:Morimoto MotoHolD2rs (2x) BULBS:NOT INCLUDED WARRANTY:5 Years SATISFACTION:Finally! COMPATIBILITY MINI D2S:Mini D2S 1.0-4.0 NHK:D2S w/ threaded shaft ACME:D2S w/ threaded shaft GENERIC PROJECTORS:"Mini D2S" Style (all versions) BULBS:All D2S / D4S HID TECH SPECS MATERIAL:BASF Ultramid A3WG6 TEMP TOLERANCE:280C / 530F COLOR:Black FLAMMABILITY:
Fineline 7.1 Projector - Street Ambitionz
Fineline 7.1 Projector from $35.00
Product Description: Looking to really step up your output? But not empty your wallet? We've got you covered!  Our Fineline Bi Xenon 7.1 H1 Projectors have a great crisp cutoff, awesome color flicker and a wide, even output.  With the threaded shaft making for an easy install, and included hardware making some models a direct fit with no modification of the headlight bucket needed!Stop struggling to see at night with the poor output of your oem halogen housings, and let our Fineline projectors light up the night!Our projectors have the 7.1 engraved on the projector for authenticity, accept no imitations! Order Includes: A lifetime warranty  Bi-Xenon Fineline 7.1 Projector (Single or Pair) 2 x Hardware Bags Optional: Pair of Chrome Mini Gatling Shrouds Shipping: We ship worldwide! We also offer expedited shipping if you're in a rush! If you need a custom shipping quote please contact us. Install Help: For help with installation please check out our "FAQ" page,any other questions or concerns please try our live chat or give us a call at (971)-303-7900 Warranty: Self installed products are covered under a (1) Year Warranty, products installed by an Authorized Street Ambitionz Dealer are covered under a lifetime warranty. *All sales are final, any returns will be honored in the form of in-store credit only.
HID Projectors Morimoto Mini H1 7.0 - Street Ambitionz HID Projectors Morimoto Mini H1 7.0 - Street Ambitionz
HID Projectors Morimoto Mini H1 7.0 from $130.00
GAME OVER: Morimoto has always been the benchmark when it came to the Mini H1...But no matter how many imitations popped up over the years, they just couldn't compare, and now it's most certainly too late to catch up. The 7.0 represents the most massive overhaul in Mini H1 history. LUCKY #7: Let's keep it simple and make a list of everything new about the 7.0. The optically clear lens. The 7-signed metal lens holder. The side-push bi-xenon solenoid mechanism. The die-cast radically curved cutoff shield. The foreground limiter. The reflector bowl. The IR, high-temp resistant reflector finish. The threaded shaft and it's precision and added length. The results! The beam is wider. The distribution of light more proper. Your ability to see is better. EASY TO INSTALL: Now even easier to install with a longer threaded shaft compared to the 6.0! Their amazing ease of installation relative to the amount of performance they produce makes them our most popular projector. Simply remove headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, hand-tighten, check rotation, tighten, and re-seal headlights. Minimal cutting involved. (if any!) Check out the Installation Procedure linked above. PERFORMANCE SHOOTOUT: With the most modern optics, an optically clear lens, and their curved cutoff shield; The 7.0 will outshine almost every OEM HID projector on the market and go head to head with the legendary S2000 projectors! (which cost 3x as much, are much harder to retrofit, and don't even have a high beam) Their wide, uniformly lit low beam stays intense all the way to the outer limits. Their bi-xenon high beam provides an insane amount of additonal light on demand. STANDARD EQUIPPED: With your choice of either Mini Gatling Gun or Mini Graphite shrouds to keep things compact and easy to assemble. Full size shrouds are also compatible with the Mini's using the centric rings. OPTIONAL PRECISION BULB HOLDERS: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. WHAT'S INCLUDED PROJECTORS: 2x Morimoto Mini H1 7.0 Bi-Xenon HARDWARE PACKS: 2x Lock Rings, Bulb clips, etc. SOLENOID INPUTS: 2x 9006 Male Sockets SHROUDS: Not Included WARRANTY: 3 Years COMPATIBILITY APPLICATIONS: Universal (cars/trucks/motorcycles) DIRECT FITMENT: H4, H7 Headlights (little/no mods required) MODIFICATIONS REQUIRED: H1,H11,H13,9005,9006,9007 housings BULB TYPE: H1 HID Only SHROUDS: All Styles (w/ Centric Rings) CENTRIC RINGS: Shrouds Require Mini H1 model CERTIFICATIONS: Exceeds DOT requirements TECH SPECS DEPTH: 139mm (includes bulb holder) WIDTH: 88mm HEIGHT: 73mm LENS DIAMETER: 2.5" MOUNTING SHAFT: 20mm Diameter HOUSING DEPTH: 115mm Minimum STANDARD LENS: 100% clarity "Kuria Optic" glass
8
© Street Ambitionz Automotive Lighting 2012, All Rights Reserved