XTR LED License Plate Back Up Reverse Light System - Street Ambitionz XTR LED License Plate Back Up Reverse Light System - Street Ambitionz
XTR LED License Plate Back Up Reverse Light System $81.00
BACK IT UP: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP. ENGINEERED: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product. WHAT'S INSIDE: 54 CREE J Series 2835 LEDs rated at 4500K/80CRI. 180mA driver produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens. TECHNICALLY SPEAKING: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application. BOLT-ON: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat. WIRING:The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary. PRODUCT SPECS WHAT'S INCLUDED REVERSE LIGHT: 1x XTR LP LED Reverse Light WIRING: 1x Power Tap Kit WARRANTY: 5 Years COMPATIBILITY CIRCUITS: 9-16V Electrical Systems LICENSE PLATES: US-Spec Plate Mounts (excl. 19+ Dodge Ram) TECH SPECS INTENSITY: 2,700lm (Raw), 1,950lm (Effective) POWER: 29w OPTIC: -30deg to +15deg vertical range LIGHT SOURCE: 54X CREE J 4500K (Warm White)
Chevy Camaro (14-15) XB LED Tails Chevy Camaro (14-15) XB LED Tails - Street Ambitionz
Chevy Camaro (14-15) XB LED Tails $455.00
STOCK SUCKS: No doubt the Camaro is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time for a tail light facelift too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Camaro LED tail lights too! COMPATIBLE: With with all 14-15 Camaro's, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the OE setup on the 16-18 Camaro, these are easily the best way to update the look on your car. They won't look out of place like most cheesy aftermarket replicas, and match the fit and finish of OEM parts.The XB LED tails for your Camaro are available with either a smoked or red lens. Both will illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 14-15 Camaro XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY CHEVROLET CAMARO: 2014-2015 (US Models Only) REPLACES GM PART #: 23161676, 23161677 COMPLIANCE: DOT, ECE, SAE Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: GM Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Chevy Camaro (16-18) XB LED Tails Chevy Camaro (16-18) XB LED Tails - Street Ambitionz
Chevy Camaro (16-18) XB LED Tails from $435.00
STOCK SUCKS: No doubt the sixth gen Camaro is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Camaro LED tail lights too! COMPATIBLE: With with all 2016-18 Camaros, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the Lamborghini Aventador, while they look radical, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED tails for your Camaro are available with either a smoked or red lens. Both will illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 16-18 Camaro XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY CHEVROLET CAMARO: 2016-2018 (US Models Only)(2018 req. optional harnesses) REPLACES GM #: 23416448, 23382195 COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: GM Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Chevrolet Camaro (16-18) XB LED Facelift Tails - Street Ambitionz Chevrolet Camaro (16-18) XB LED Facelift Tails - Street Ambitionz
Chevrolet Camaro (16-18) XB LED Facelift Tails from $447.00
PRODUCT DETAILS STOCK SUCKS: Well, maybe not always! Looking to set your 16-18 Camaro apart with the new Camaro's looks? Morimoto's new XB LED Facelift Tails give you just that, and are guaranteed for a decade! COMPATIBLE: With with all 2016+ Camaro's, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the newest Camaro tails, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED Facelift tails for your Camaro are available with the lightly smoked clear lenses or red lenses. Either way, they illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x 2016-18 Camaro XB LED WIRING: Plug n Play connection kit WARRANTY: 10 Years COMPATIBILITY REPLACES GM #: 23416448 & 23382195 CHEVY CAMARO: 2016-2018 NOTE: 2018 cars need optional adapter harness (Included in all orders) NOTE: Not compatible with non-US spec cars. MEETS: DOT, SAE, FMVSS108 STANDARDS TECH SPECS INPUT SOCKET: GM Multi-pin OEM WEATHER RATING: IP67 Waterproof LENS MATERIAL: High Impact Polycarb (UV-Resistant) HOUSING: Injection molded ABS LIGHT SOURCE: SSC LED (Red) MODES: Turn/Brake (Dual Intensity) year-2016,year-2016-make-chevrolet,year-2016-make-chevrolet-model-camaro,year-2017,year-2017-make-chevrolet,year-2017-make-chevrolet-model-camaro,year-2018,year-2018-make-chevrolet,year-2018-make-chevrolet-model-camaro
Chevrolet Corvette (05-13) XB LED Tails - Street Ambitionz Chevrolet Corvette (05-13) XB LED Tails - Street Ambitionz
Chevrolet Corvette (05-13) XB LED Tails $535.00
STOCK SUCKS: No doubt the four oval tails on the Vette is a badass classic design - but if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all C6 Vette's from 2005-2013, these complete Chevrolet LED tail light assemblies will swap directly in place of the original C6 Corvette tail lights, use all of the stock mounting points, and should not take more than 30 minutes to install all four. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. These C6 Corvette tail lights will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: These Chevrolet LED tail lights don't look out of place on the Vette either. While their styling is far more modern than the old incandescent tail lights - they're not going to awkwardly turn your Vette into a spaceship either! We love the way they look and think they'd be a welcome upgrade to the rear end of any C6 Corvette. WELL-BUILT: These C6 Corvette tail lights' durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new Chevrolet LED tail lights for your Corvette, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 4x (One Set) 05-13 Corvette C6 XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY CHEVROLET CORVETTE C6: 2005-2013 (US Models Only) REPLACES GM PART #: 10440716, 10440715, 15279751, 15279752, 2800188, 2801188 COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: GM Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED year-2005,year-2005-make-chevrolet,year-2005-make-chevrolet-model-corvette,year-2006,year-2006-make-chevrolet,year-2006-make-chevrolet-model-corvette,year-2007,year-2007-make-chevrolet,year-2007-make-chevrolet-model-corvette,year-2008,year-2008-make-chevrolet,year-2008-make-chevrolet-model-corvette,year-2009,year-2009-make-chevrolet,year-2009-make-chevrolet-model-corvette,year-2010,year-2010-make-chevrolet,year-2010-make-chevrolet-model-corvette,year-2011,year-2011-make-chevrolet,year-2011-make-chevrolet-model-corvette,year-2012,year-2012-make-chevrolet,year-2012-make-chevrolet-model-corvette,year-2013,year-2013-make-chevrolet,year-2013-make-chevrolet-model-corvette
Chevrolet Corvette (14-19) XB LED Tails - Street Ambitionz Chevrolet Corvette (14-19) XB LED Tails - Street Ambitionz
Chevrolet Corvette (14-19) XB LED Tails from $600.00
STOCK SUCKS: No doubt the C7 Vette is a badass design - but if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all C7 Vettes from 2014-2019, these complete Chevrolet LED tail light assemblies will swap directly in place of the original C7 Corvette tail lights, use all of the stock mounting points, and should not take more than 30 minutes to install the pair. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. These C7 Corvette tail lights will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: These Chevrolet LED tail lights don't look out of place on the Vette either. While their styling is far more modern than the old incandescent tail lights - they're not going to awkwardly turn your Vette into a spaceship either! We love the way they look and think they'd be a welcome upgrade to the rear end of any C7 Corvette. WELL-BUILT: These C7 Corvette tail lights' durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new Chevrolet LED tail lights for your Corvette, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 14-19 Corvette C7 XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY CHEVROLET CORVETTE C7: 2014-2019 (US Models Only) REPLACES GM PART #: 23219535, 23170469, 23170470, 23219536 COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: GM Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED, White SSC LED
Chevrolet Silverado (14-18) XB LED Tails - Led Tail Lights Chevrolet Silverado (14-18) XB LED Tails - Street Ambitionz
Chevrolet Silverado (14-18) XB LED Tails $515.00
STOCK SUCKS: No doubt the Silverado is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all Silverados from 2014-2018, these complete tail light assemblies will swap directly in place of the original Silverado tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Silverado are available solely with a smoked lens, which will still illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Silverado, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.   PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 14-18 Silverado / 14-18 Sierra HD Dually XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY CHEVROLET SILVERADO: 2014-2018 (US Models Only w/o OE LED Tails) GMC SIERRA HD DUALLY: 2014-2018 (Not SRW nor 1500 Models) REPLACES GM PART #: 23431876, 23431875 COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: GM Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Dodge Ram (09-18) XB LED Tails - Street Ambitionz Dodge Ram (09-18) XB LED Tails - Street Ambitionz
Dodge Ram (09-18) XB LED Tails $515.00
STOCK SUCKS: No doubt the Ram is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all Rams from 2009-2018, these complete tail light assemblies will swap directly in place of the original tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Ram are available with either a smoked or red lens, either of which will still illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Ram, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 09-18 Dodge Ram XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY DODGE RAM 1500/HD: 2009-2018 w/o OEM LEDs (Note: 2013-2014 trucks may require reprogram to avoid error codes) REPLACES MOPAR PART #: 55277415AF, 55277414AF COMPLIANCE: DOT, ECE, SAE,FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Mopar Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED, White SSC LED
Ford F150 (15-20) XB LED Tails - Led Tail Lights Ford F150 (15-20) XB LED Tails - Street Ambitionz
Ford F150 (15-20) XB LED Tails from $515.00
STOCK SUCKS: No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all Non-BLIS F150s from 2015-2018, these complete tail light assemblies will swap directly in place of the original F150 tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (for 15-17 trucks; 2018+ require the optional harness). They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! NOTE: 2018+ F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAIL LIGHT-EQUIPPED TRUCKS. STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your F150, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.   PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 15-20 F150 XB LED Tail Lights WIRING: 15-17 Plug and Play Harness 2018-2020 WIRING: Requires Optional Harnesses WARRANTY: 5 Years COMPATIBILITY FORD F-150 / RAPTOR: 2015-2020 (US Models Only w/o BLIS or LED Tails )(2018-2020 req. optional harnesses) REPLACES FORD PART #: FL3Z-13405-A, FL3Z-13404-A COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Ford Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Ford Mustang (10-12) Facelift XB LED Tails - Street Ambitionz Ford Mustang (10-12) Facelift XB LED Tails - Street Ambitionz
Ford Mustang (10-12) Facelift XB LED Tails $435.00
STOCK SUCKS: No doubt the S197 Mustang is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Mustang LED tail lights too! COMPATIBLE: With all S197 Mustangs from 2010-2012, these complete tail light assemblies will swap directly in place of the original Mustang tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the S550 Mustang tails, they surely don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED tails for your 'Stang are available with a smoked lens. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Mustang, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.   PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 10-12 Mustang XB LED Facelift Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY FORD MUSTANG: 2010-2012 (US Models Only) REPLACES FORD PART #: AR3Z-13405-B, AR3Z-13405-B COMPLIANCE: DOT, ECE, SAE Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Ford Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED, White SSC LED
Ford Mustang (10-14) XB LED 3BL - Street Ambitionz Ford Mustang (10-14) XB LED 3BL - Street Ambitionz
Ford Mustang (10-14) XB LED 3BL $110.00
STOCK SUCKS: No doubt the S197 Mustang is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Mustang LED third brake light too! COMPATIBLE: With all S197 Mustangs from 2010-2014, these complete tail light assemblies will swap directly in place of the original Mustang third brake light, use all of the stock mounting points, and should only take around 15 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock light and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB LED third brake light may not be the cheapest, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED THIRD BRAKE LIGHT: 1x 10-14 Mustang XB LED Third Brake Light WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY FORD MUSTANG: 2010-2014 (US Models Only REPLACES FORD PART #: AR33-13A613-A COMPLIANCE: DOT, ECE, SAE Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Ford Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Ford Mustang (13-14) Facelift XB LED Tails - Street Ambitionz Ford Mustang (13-14) Facelift XB LED Tails - Street Ambitionz
Ford Mustang (13-14) Facelift XB LED Tails $435.00
STOCK SUCKS: No doubt the S197 Mustang is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Mustang LED tail lights too! COMPATIBLE: With all S197 Mustangs from 2010-2012, these complete tail light assemblies will swap directly in place of the original Mustang tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the S550 Mustang tails, they surely don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED tails for your 'Stang are available with a smoked lens. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Mustang, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.   PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 13-14 Mustang XB LED Facelift Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY FORD MUSTANG: 2013-2014 (US Models Only) REPLACES FORD PART #: DR3Z-13404-A, DR3Z-13404-B COMPLIANCE: DOT, ECE, SAE Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Ford Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED, White SSC LED
Ford Mustang (15-18) XB LED Tails - Street Ambitionz Ford Mustang (15-18) XB LED Tails - Street Ambitionz
Ford Mustang (15-21) XB LED Tails $445.00
STOCK SUCKS: No doubt the S550 Mustang is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Mustang LED tail lights too! COMPATIBLE: With all S550 Mustangs from 2015-2020, these complete tail light assemblies will swap directly in place of the original Mustang tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. PLUG N PLAY: Wiring is easy too! The Morimoto XB LED tail lights are designed to work without any special wiring. They will plug into the factory connectors for the 2015-2018 Mustang's stock tail lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: Inspired by the new Ford GT, while they look radical, the Morimoto XB tail lights don't look out (more...) PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2x (One Pair) 15-21 Mustang XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY FORD MUSTANG: 2015-2021 (US Models Only) REPLACES FORD PART #: FR3Z-13404-B, FR3Z-13405-B COMPLIANCE: DOT, ECE, SAE, FMVSS108 STANDARDS NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Ford Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Jeep Wrangler (07-18) XB LED Tails - Street Ambitionz Jeep Wrangler (07-18) XB LED Tails - Street Ambitionz
Jeep Wrangler (07-18) XB LED Tails $330.00
STOCK SUCKS: No doubt the Wrangler JK is a capable off-roader, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable 2007-2018 Jeep Wrangler tail lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! COMPATIBLE: With all Wranglers from 2007-2018, these complete tail light assemblies will swap directly in place of the original JK tail lights, use all of the stock mounting points, and should only take around 15 minutes to install. PLUG N PLAY: Wiring is easy too! The Morimoto XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Wrangler are available solely with a carbon effect bezel, which will still allow the center to illuminate red. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Wrangler, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 2xx (One Pair) 07-18 Wrangler JK XB LED Tail Lights WIRING: Plug and Play Harness WARRANTY: 5 years COMPATIBILITY JEEP WRANGLER JK: 2007-2018 (US Models Only) REPLACES MOPAR PART #: 55077890AF, 55077891AF COMPLIANCE: DOT, SAE, FMVSS108 Standards NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known. TECH SPECS INPUT: Mopar Multi-Pin OEM MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) LIGHT SOURCE: Red SSC LED
Toyota 4Runner (14-21): XB LED Tails - Street Ambitionz Toyota 4Runner (14-21): XB LED Tails - Street Ambitionz
Toyota 4Runner (10-21): XB LED Tails $635.00
PRODUCT DETAILS STOCK SUCKS: No doubt the 5th Gen 4Runner is one of the best SUV's Toyota ever made! .and if you've already upped the ante with bigger wheels and tires, a lift, a badass roof rack, and all the Baja Designs LED pods money can buy up front! ..Then its probably time to ditch the stock tail lights too, right? COMPATIBLE: With all Toyota 4Runners from 2010-2021, these complete LED tail light assemblies will swap directly in place of the original 4Runner tail lights, use all of the stock mounting points, and should take less than 30 minutes to install. PLUG N PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc. needed! STYLE: If you want your 4Runner to stand-out without looking cheesy, the XB's are just the ticket. While the dual raised sections on the lens may not be for everybody, when mounted up on the truck -- they actually do appear at home. The sequential turn signal has an undeniably modern appeal, and makes them a perfect compliment to a set of XB LED headlights on the front of your truck. WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your T4R, but they're OE quality, and as the saying goes, you pay for what you get.   PRODUCT SPECS WHAT'S INCLUDED TAIL LIGHTS: 4Runner XB LED (Set - L/R) WIRING: Plug and Play Harness WARRANTY: 5 Years COMPATIBILITY TOYOTA 4RUNNER: 2010-2021 WIRING: Plug n Play VEHICLES: US Only MEETS: DOT, SAE, FMVSS108 STANDARDS TECH SPECS INPUT SOCKET: Tyoyta Multi-pin OEM WEATHER RATING: IP67 Waterproof LENS MATERIAL: High Impact Polycarb (UV-Resistant) HOUSING: Injection molded ABS LIGHT SOURCE: SSC LED (Red), (Amber) Signal MODES: Turn, Running, Brake year-2014,year-2014-make-toyota,year-2014-make-toyota-model-4-runner,year-2015,year-2015-make-toyota,year-2015-make-toyota-model-4-runner,year-2016,year-2016-make-toyota,year-2016-make-toyota-model-4-runner,year-2017,year-2017-make-toyota,year-2017-make-toyota-model-4-runner,year-2018,year-2018-make-toyota,year-2018-make-toyota-model-4-runner,year-2019,year-2019-make-toyota,year-2019-make-toyota-model-4-runner,year-2020,year-2020-make-toyota,year-2020-make-toyota-model-4-runner,year-2021,year-2021-make-toyota,year-2021-make-toyota-model-4-runner
16
© Street Ambitionz Automotive Lighting 2012, All Rights Reserved