Key points to remember is.
1. Run cardboard in stove before you start till it burns off alittle. You don't want smoke in your headlights
2. Run stove for 10 mins before popping headlights
3. Be conservitive when using JB weld
4. Be gentle with DRL Boards
5. Don't forget putting screws back in while it's warm. Don't over tighten.
Heres a link to parts here
This DIY only works on Spec-d headlights for FRS.
Installing our 2015-2019 Dodge Charger DRL Flow boards is pretty simple once you have the pieces apart. We use beading wire after notching the boards but we don't recommend for the average guy.
